Modifying a car starter

Auto Starter is a mechanical key to start the car and to be the most essential part of any vehicle. If starter does not work you can not start the vehicle. When you start the machine, is a charge for goodwill and then sent from the battery to the alternator, but if you have problems starting your car that means the starter does not fulfill its duties. So, it's time to replace or change the starter motor. To change the starter is not so simple, but with the givenDirections can be changed easily:

The article

Jump Starter

The things that are necessary for the starters are:

- Self-Starter
- Tape
- Tools
- Ratchet September
- Keys
- Jack
- Lighting
- Marker (for marking the cable)

Things to do

Prepare

Apply the parking brake and place or protocols wedge behind the rear wheels. Place the socket on a specific place on the front of the vehicle, lifting the car. Take thenegative battery cable and remove it. During this activity to avoid trying to do all the electrical connections.

Locate the starter

Starting position depending on the type of vehicle. Find the location of the vehicle. You can be on the driver. This is an eight-inch long tube with five fifty-five cm in diameter, with two electric and one hard link.

Disconnect the connectors

Now is the time to remove the link. You can remove the electricCompounds with the help of his hand gently, but to connect you need to mount a suitable wrench or ratchet. Remove the electrical connections and check the cable, with details on the labels, to help you connect the cable then coordinate with the thorns. Now take a wrench or ratchet remove the connection and installation. It is rather difficult to solve this connection at times, be careful not to push too hard, so you give them.

Once you have done, take the old starterout.
Installation (New Starter)

Once you do start with the removal of the old wound, a new starter and replace. Make sure you installed the new starter at the right place and the right. In order to prevent any power lines in perfect order to a greater damage to the engine. Attach the mounting plate connecting again with the help of the key.

Connect the negative cable to the negative terminal of the battery.

Review

In the end, check allConnections again and if you are sure that everything is perfect in its place, try to start the engine. The soft-start engine checks the value of your work.

Modifying a car starter

revivanail nail products mies van der rohe chaise lounge